WelCome, We deliver as Promised

Customer Care:

(+65) 62994711

My Cart


RODE Videomic Pro_with Rycote_Compact Directional On-camera Microphone

Write Your Review

Availability : Please Contact Us

SG$ 0.00

*Prices are before G.S.T.

Condition: Brand New

Warranty: 1 Year Manufacturer's Singapore Warranty

Shipping Time: 1-3 Business Days

SKU: RODEVideomicProR

RODE Videomic Pro (with Rycote) (Compact Directional 
On-camera Microphone) Compact Shortgun Microphone)

Rode DeadCat VMPR_Artificial Fur Wind Shield for VideoMic Pro with Rycote

Rode DeadCat VMPR_Artificial Fur Wind Shield for VideoMic Pro with Rycote

SG$ 53.00
RODE SC4_3.5mm TRS to TRRS adaptor

RODE SC4_3.5mm TRS to TRRS adaptor

SG$ 0.00
RODE VXLR_3.5mm Minijack to XLR Adaptor

RODE VXLR_3.5mm Minijack to XLR Adaptor

SG$ 25.00
RODE VC1_Minijack/3.5mm Stereo Extension Cable 3m/10'

RODE VC1_Minijack/3.5mm Stereo Extension Cable 3m/10'

SG$ 33.00
RODE Boompole_Professional Boompole - 3.3meter

RODE Boompole_Professional Boompole - 3.3meter

SG$ 147.00
RODE Boompole Pro_Carbon fibre boompole - 3m

RODE Boompole Pro_Carbon fibre boompole - 3m

SG$ 0.00
The RODE VideoMic Pro is a true shotgun microphone designed for use with camcorders,
DSLR cameras and portable audio recorders as a source of primary and reference audio.

At the heart of the VideoMic Pro is an all-new 1/2inch condenser capsule that provides
broadcast-quality audio via a 3.5mm minijack connector
(outputting the mono signal to
both left and right channels) with an incredibly low self-noise of just 14db.

A super-cardioid polar pattern ensures that surrounding audio is minimised,
and your recording is focused on the subject in front of the camera.

The integrated Rycote® Lyre® based shock mounting system separates the VideoMic Pro capsule
and electronics from its mount,
providing isolation from external physical factors that may
cause unwanted rumble and vibrations in the microphone.

Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior
acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.

Easily accessible on the rear face of the microphone are the power, filter and level controls.

In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available,
which will prevent low end noise such as air conditioners and traffic from being recorded.

Below these controls are the level settings, which attenuate or boost the recorded level as required.

The -10dB level attenuation (or PAD) is ideal for recording loud sound sources, such as live music,
motorsport, or interviews where the subject is very close to the camera.

The +20dB level boost is designed for use with DSLR cameras,
allowing the user to reduce the camera's preamp level (or mic-input level),

The RODE VideoMicPro is designed and made in Australia.

VideoMic Pro Features

Rycote® Lyre® shock mounting onboard
All-new capsule with lower noise and higher sensitivity
Broadcast recording quality condenser microphone
Compact form factor (150mm/6” length)
Ultra lightweight (85g/3oz
9V battery powered - over 70 hours use (alkaline)
Integrated shock mounting
Integrated foam windscreen
3.5mm stereo mini-jack output (dual mono)
Two step High Pass Filter (flat, 80Hz)
Three position level control (-10dB, 0, +20dB)
Camera shoe mount with 3/8” thread for easy boompole mounting
Manufacturer Rode
Select your Mic Shotgun Microphones, 3.5mm Mini Jack Mics (for DSLR and Camcorders), Compact On Camera Mics
Capsule Type Condenser
Polar Pattern Super-cardioid
Output Connector 3.5mm mini Jack
Power Options 9V Battery
Acoustic Principle Line Gradient
Address Type End
Frequency Range 40Hz - 20kHz(selected HPF @80Hz)
Output Impedance 200Ω
Maximum SPL 134dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level 6.9mV
Sensitivity -32.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Active Electronics JFET impedance converter
Equivalent Noise Level (A-weighted) 14dB-A
Compact Directional On-camera Microphone
  • No Files attached with this product.

How do you rate this product?

  1 star 2 stars 3 stars 4 stars 5 stars

Write your own review

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.