RODE WS6 _Deluxe Wind Shield_for NTG1, NTG2, NTG4,NTG4+ / Any Mic with maximum slot length of 160.5mm_6 1/4"and a diameter of 21-22.5mm
RODE Blimp_Wind Shield and Shock Mount System_Consist of Basket windshield + Suspension grip + Hairy Cover
Rode NTG2 (Multi-Powered Shotgun Microphone
Broadcast sound quality
Low noise circuitry
Rugged metal construction
Two step High Pass Filter (Flat/80Hz)
P48 phantom power or AA battery option
Low handling noise
Low weight - 161g (5.17 oz.)
Includes mic clip, wind shield and zip case
Ideal for professional applications within the film, video, television and production industries
Rode PG2 (Shock Mounted Pistol Grip)
The RODE PG2 Pistol Grip Shock Mount is designed to reduce handling noise when recording with shotgun microphones.
It supports microphones with a diameter of 19-20mm or 21-22.5mm using the supplied interchangeable mounts,
and a handy release lever on the mount allows for quick and easy adjustment of the microphone angle.
Cable management is an integral design feature of the PG2 pistol grip,
with the cable running through the handle assembly to minimise any handling noise or clutter.
Additional cable security is provided on either side of the rubber shock mount.
The PG2 can be operated by hand or attached to a boompole via the 3/8" thread attachment at the base
Rode WS6 (Deluxe Wind Shield)
The RODE WS6 Deluxe Windshield is an easy to use high-performance windshield for shotgun microphones.
Designed to reduce wind noise when recording in adverse environmental conditions,
the WS6 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur.
A rubber base prevents any wind noise from entering the rear of the microphone pickup area.
Suitable for the RODE NTG1, NTG2, NTG4 and NTG4+ as well as any shotgun microphone
with a maximum slot length of 160.5mm (6 1/4") and a diameter of 21-22.5mm.
|Select your Mic||Shotgun Microphones|
|Output Connector||3pin XLR|
|Acoustic Principle||Line Gradient|
|Frequency Range||20Hz - 20kHz|
|Maximum SPL||131dB SPL (@ 1kHz, 1% THD into 1KΩ load)|
|Maximum Output Level||6.9mV|
|Sensitivity||-36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz|
|Active Electronics||JFET impedance convertor with balanced transformer output|
|Equivalent Noise Level (A-weighted)||18dB-A|
Rode NTG2 Multi-Powered Shotgun Microphone
Rode PG2 Shock Mounted Pistol Grip
Rode WS6 Deluxe Wind Shield
Availability : Please Contact UsAdd to Wishlist Add to Compare
Availability : Pre OrderAdd to Wishlist Add to Compare