WelCome, We deliver as Promised

Customer Care:

(+65) 62994711

My Cart

0

LD Systems Roadbuddy10 HS_Battery Powered Bluetooth Speaker with Mixer, Bodypack and Headset

Write Your Review

Availability : Please Contact Us

SG$ 0.00

*Prices are before G.S.T.

Condition: Brand New

Warranty: 1 Year Manufacturer's Singapore Warranty

Shipping Time: 7-14 Business Days

SKU: LDSystemsRoadbuddy10HS


LD Systems Roadbuddy10HS Battery Powered Bluetooth 
Speaker with Mixer, Bodypack and Headset



LD Systems Roadbuddy10 HS Features

The LD Systems Roadbuddy10 is an elegant solution for voice and music transmission on the go.

The 2-way speaker with a 10" custom woofer and a 1" compression driver is operated with
a rechargeable battery for up to 8 hours and
is powered by a class D power amplifier with a highly
efficient switching power supply and 480 watts of peak power.

The Roadbuddy relies fully on wireless transmission: it has an UHF radio receiver which operates
in the license-free 863 - 865 MHz range,
and can be expanded with an additional system.

The on-board Bluetooth player with backlit multifunction display, equalizer, USB port and SD card slot
supports the mp3, wma and wav formats.


A handheld microphone with 10 mW output power (LDRBUD10) or as an alternative a headset
microphone with belt pack (LDRBUD10HS)
and an IR-remote control for the player are included.

For wired devices, the Roadbuddy has two channels with combo jacks and individual volume
controllers that are switchable for microphone a
nd line level, a stereo input via RCA (Cinch)
sockets (mono summed) and a 3.5 mm Aux input.


Treble, Bass, Echo and Master volume controllers complete the control panel.

The LD Systems Roadbuddy is easily transportable thanks to built-in castor wheels and a pull-out handle.
On the top, there is a handy storage compartment for up to two hand-held transmitter microphones.

The plastic housing of this lightweight device has been designed to accommodate a 35 mm tripod mount.

SPECIFICATION

Product number: LDRBUD10HS

Product type:Battery-powered PA speaker
Low/mid driver dimensions:10"
Low/mid driver dimensions (mm):254mm
Woofer magnet:Ferrite
Woofer brand:Custom-made
HF driver dimensions:1"
HF driver dimensions (mm):25.4mm
HF driver magnet:Ferrite
HF driver brand:Custom-made
Amplifier:Class D
RMS:120W
Peak power:480W
Frequency response:55 - 18000Hz
SPL (1W/1m):96dB
Max. SPL:115dB

Protection circuits:over-current, short circuit, overload protection


Controls:Mic 2 Level, low, Mic 1 Level, AUX / MP3 switch, CD / Tape IN Level, high, Master Volume, Echo


Indicators:Charge/battery status, Power

Media player

Supported media:SD Card, USB stick, Bluetooth
Supported formats:WAV-CD, MP3 file, WMA file

Media player controls:equalizer, Stop, Previous Track, Play / Pause, Next Track, Mode
(Menu / Bluetooth /SD / USB), Repeat


Media player display elements:Lighted multifunctional LC display

Line inputs:1
Line input connectors:2 x XLR, 6.3 mm Jack, 3.5 mm jack, 2 x RCA
Mic inputs:2, 6.3 mm Jack, 2 x XLR

Wireless Unit

Transmission frequency range:863 - 865MHz
Modulation Type:FM
Channels:16
Frequency Response Wireless Unit:50 - 17000lx @ 1mHz

Controllers Wireless Unit:Power / Volume, Mute Level (Squelch), ASC, Value Up, Value Down


Indicators Wireless Unit:RF (LED), LED Display, AF (LED)

Connections Wireless Unit:nTNC for receiver antenna
RF Transmitter Power Output:10mW
Bodypack weight:0.08kg
Bodypack material:ABS plastic
Operating voltage:Switching Power Supply, 100 V - 120 V / 60 Hz, 220 V - 240 V AC / 50 Hz
Rechargeable batteries:12 V / 5 Ah
Cabinet material:polypropylene
Cabinet construction:vented

Other features:IR Remote for Media Player, extendable handle, Stand mount 36 mm,
transport handle, Transport casters
Manufacturer LD Systems
  • LD Systems Roadbuddy10 HS Battery Powered Bluetooth Speaker with Mixer, Bodypack and Headset
  • No Files attached with this product.

How do you rate this product?

  1 star 2 stars 3 stars 4 stars 5 stars
Price
Value
Quality

Write your own review

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.